File Name: electrical hazards and safety measures .zip
Easy-to-read, question-and-answer fact sheets covering a wide range of workplace health and safety topics, from hazards to diseases to ergonomics to workplace promotion.
An electrical hazard is a dangerous condition where a worker can or does make electrical contact with energized equipment or a conductor. From that contact, the person may sustain an injury from shock, and there is a potential for the worker to receive an arc flash electrical explosion burn, thermal burn or blast injury. Electricity can either be "static" or "dynamic". Dynamic electricity is the uniform motion of electrons through condition electric current. Static electricity is the accumulation of charge on surfaces as a result of contact and friction with another surface. Employers need to develop and implement a written health and safety program that supports the control of electrical hazards in the workplace and follow the regulations that apply to electrical hazards in the workplace.
Safety must not be compromised and some ground rules need to be followed first. The basic guidelines regarding safe handling of electricity documented below will help you while working with electricity. Avoid water at all times when working with electricity. Never touch or try repairing any electrical equipment or circuits with wet hands. It increases the conductivity of electric current. If you are working on any receptacle at your home then always turn off the mains.
Are all stair and floor defects, such as loose tiles, broken steps, torn carpeting, loose or curled mats, and worn, frayed or. Eliminate the hazard, i. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment. TC Energy Safety Handbook 3. File: PDF, 3.
The Electrical Personal Protective Equipment PPE program provides requirements to ensure electrical workers are protected from electrical hazards while working on electrical equipment. Employees who work with electrical equipment shall be provided with appropriate electrical PPE and be knowledgeable in the selection, use, limitations, inspection, donning, doffing, and maintenance of PPE. This electrical personal protective equipment procedure provides guidelines for determining when electrical PPE is required and how to select, use and maintain electrical PPE. This procedure describes electrical hazards, including electrical shock and burns, arc flash burns, arc-blast impacts, and other potential electrical safety hazards. Definitions See Appendix A.
Mapping safety and environmental management policies, procedures, or operations using this document does not guarantee compliance regulatory requirements.
Skip to search form Skip to main content You are currently offline. Some features of the site may not work correctly. DOI: Saba and J. Tsado and E.
Beta This is a new way of showing guidance - your feedback will help us improve it. Electricity can kill or severely injure people and cause damage to property. However, you can take simple precautions when working with or near electricity and electrical equipment to significantly reduce the risk of injury to you, your workers and others around you.
The major hazards associated with electricity are electrical shock and fire. Electrical shock occurs when the body becomes part of the electric circuit, either when an individual comes in contact with both wires of an electrical circuit, one wire of an energized circuit and the ground, or a metallic part that has become energized by contact with an electrical conductor. The severity and effects of an electrical shock depend on a number of factors, such as the pathway through the body, the amount of current, the length of time of the exposure, and whether the skin is wet or dry.
Unless proper procedures are instituted, personnel installing or servicing these systems are frequently exposed to the hazards of shock, arc flash and arc blast.Quescarexar1953 23.03.2021 at 02:51
Yamaha 25 hp outboard service manual pdf robert browning the ring and the book pdfSlainie F. 24.03.2021 at 01:54
Hazards of Electricity Occurs when you touch electrical wiring or equipment that additional safety measure that provides a level of safety equal to that.